REVIEWS

Nice experience, although you have to try a lot of chemicals and times until you get a satisfactory result. When I got it, the plates on the box were finished… In any case, I will repeat. Thank you very much

Very good lens board, fits my speed graphic perfectly and the custom size hole also excellent, thank you.

Zebra 4×5 Dry Plate Tintypes

Great Production and outstanding service

very light, perfectly made. I already own the 8×10 holder. I can highly recomment the Zebra products. 🙂

The Wet Plate Holder from Nejc is brilliant. It can be loaded from the back and closed with a plate using magnets. Very sturdy and high-quality.

The reducer frames are also very helpful.

Everything is great!

Hi, I still have not received my order. Can u pls follow up on this? Many thanks

Oliver.

FYI, I have spoken to a couple specialist analogue camera shop in regards for stocking/distributing your Zebra Product in Australia. This includes Iroha, Vintech, Film never Die and Kindred. The have your company info and can get in touch direct with you if they are interested. Tintype processing is still very very slow in Australia. But I think the momentum will happen in the near future. Anyway we keep in touch and I will spread the word.

I will reside on the island Hydra in Greece from June to November. If the dice fall right I might come and visit you guys.

All the best

Oliver

IG: @tintype1850

Returning customer here.

Great quality holders, great silver tanks and glass plates soooo clean it’s hard to believe!

Can recommend to everyone

The sensitising tank works wonders! Great results from a great product!

Great products, fantastic services

Porte plaque 8×10 de très belle qualité avec réducteur 5×7

I’ve used these plates for several years, and I have never had a bad plate. I will continue with them

Arrived in good shape, very nice packaging; product looks very nice, but I haven’t ben able to shot them yet. I expect them to work well though. I had to load them in a dark bag, because my dark room isn’t finished in the new house yet. I wish I had a small tank I could test develop one in.

The bord is well made, however I’d like it was more rigid. Very good service and communication. Recomended.

Zebra Salt Printing Kit (100ml)

The wetplate holder is a pure workhorse. The design with the closing magnets is ingenious. They are placed outside so there is no fear of corrosion. The little spring on the closing back keeps the plate tight, and they can also be removed for cleaning or thicker plates.

The slides closes perfectly and is color coded for exposed sheets.

Better than the previous design ( have 3 of them). The very strong magnets that keep the lid in place are a good improvement. Very happy with the design and function.

Graflex 4×5 Camera Replacement Lens Board

Nice work! Thanks a lot!

Prompt delivery, great customer service.

The slide is really well made and works well.

I am fully happy of this contact print. It works perfectly for contact printing my negative paper in positive. As advised I put extra width with 4mm cardboard and I have no blur whatsoever like I used to have when doing 8x10in contact prints. Thanks !

The lenses fit perfectly, and getting rid of lens wraps freed up room in my camera bag. Recommended!

I adore this contact frame! I ordered the A3 size so that I can make several prints at a time or one big print. I have exposed both paper and glass without a problem. The closing and opening of the frame takes very little effort while still being solid in the way it presses the print (some other frames take a bit of strength to open). I suspect the frame itself is 3D printed, which makes it very light. It came packed very safely. The glass arrived in perfect shape. I have been looking forward to a contact frame where the glass doesn’t; absorb much UV. I was a bit hesitant about ordering it because it wasn’t specified if the glass absorbs any UV (many contact frames will actually absorb a lot of UV light in my experience). Well, this glass does not absorb any UV at all (I tested this!). I’m so happy, my cyanotype exposure times are so much shorter now, I could cry. I love the attention to detail and how much love for photography the people at Zebra Dry Plates have. I hope that someday I will be able to purchase a starter kit for other processes I want to try such as platinum and palladium printing kits. Thank you Zebras <3 <3

Dieser Sensibilisierungstank ist ein wirklich innovatives Produkt. Damit entfällt endlich das lästige entleeren und Reinigen des Tanks vor Ort, und man kann die Zeit vor Ort beim Fotografieren ohne diese Reinigungs-Prozedur ausnutzen.

I’m very happy with quality, quickly delivery.

Need to choose the subject. (Be care full with high light on the back. (See the plate with a helmet ! )

2 other pics, one at f2.8, one other at f8 (Mamiya 330 and Mamiyz Sekor lens)

I used Hc110, I’ll try some other developper for try to obtain more hard contrast.

I will make another tests with speed Graphic and Symmar and with Graflex +Pentac 8’’

I’ll send to Zébra the results.

Many thanks, a real help and new way for my work with Harley Davidson Owners !..